SmartRG SR808AC
Default Login Credentials
Username
adminPassword
adminIP Address
192.168.1.1WiFi
1600 Mbps
Bands
2.4GHz / 5GHz
Protocol
802.11ac VDSL2
How to Access Your Router Admin Panel
- Connect to your router's WiFi network or via Ethernet cable
- Open a web browser and enter 192.168.1.1 in the address bar
- Enter username: admin and password: admin
- You're now in the admin panel - change the default password immediately!
Technical Specifications
WiFi Speed
1600 Mbps
WiFi Bands
2.4GHz / 5GHz
Protocol
802.11ac VDSL2
Chipset
Broadcom BCM63168
Ethernet
4x Gigabit
USB
2x USB 2.0
Modem Type
VDSL2 Gateway
Troubleshooting Guide
Common issues and solutions for SmartRG SR808AC
Can't Access SmartRG SR808AC Admin Panel?
- Ensure you are connected to the router network (WiFi or Ethernet)
- Verify the IP address is correct: 192.168.1.1
- Clear your browser cache and try again
- Disable VPN or proxy if active
- Try a different browser (Chrome, Firefox, Edge)
Default Password Not Working?
- The password may have been changed by previous owner
- Perform a factory reset (hold reset button 10-30 seconds)
- Try common variations: admin, Admin, PASSWORD
- Check the label on the router for custom credentials
- Contact ISP if router is provided by them
How to Factory Reset SmartRG SR808AC
- Locate the recessed RESET button (usually on back/bottom)
- Power on the router and wait until fully booted
- Use a paperclip to press and hold RESET for 10-30 seconds
- LED lights will blink - keep holding until they restart
- Default credentials restored: admin / admin
- ⚠️ Warning: All settings will be erased (WiFi name, password, etc.)
Security Best Practices for SmartRG SR808AC
Protect your network by following these essential security recommendations:
Change Default Password Immediately
CRITICALThe first thing you should do after logging into your SmartRG SR808AC is change the default password. Use a strong password with at least 12 characters, mixing uppercase, lowercase, numbers, and symbols.
Update WiFi Encryption
HIGHEnsure your WiFi is using WPA3 or at least WPA2 encryption. Avoid WEP and WPA as they are easily cracked. Change the default WiFi name (SSID) to something that doesn't reveal your router model.
Keep Firmware Updated
HIGHRegularly check for firmware updates for your SmartRG SR808AC. Manufacturers release updates to patch security vulnerabilities. Enable automatic updates if available.
Disable Remote Management
MEDIUMUnless absolutely necessary, disable remote management features. This prevents attackers from accessing your router from the internet.
Enable Firewall
MEDIUMMake sure the built-in firewall on your SmartRG SR808AC is enabled. Consider enabling additional security features like DoS protection and port filtering.
Disable WPS
MEDIUMWiFi Protected Setup (WPS) has known security vulnerabilities. Disable it unless you absolutely need the convenience.
💡 Pro Tip: Create a guest network for visitors to keep your main network more secure. Most modern routers including SmartRG SR808AC support this feature.
Frequently Asked Questions
Related Modems
Security Warning
These are factory default credentials. For security, always change your router's default password after installation.