ZTE ZXHN H108N

Default Login Credentials

Username

admin

Password

admin

IP Address

192.168.1.1

Open Admin Panel

How to Access Your Router Admin Panel

Connect to your router's WiFi network or via Ethernet cable
Open a web browser and enter 192.168.1.1 in the address bar
Enter username: admin and password: admin
You're now in the admin panel - change the default password immediately!

Troubleshooting Guide

Common issues and solutions for ZTE ZXHN H108N

Can't Access ZTE ZXHN H108N Admin Panel?

Ensure you are connected to the router network (WiFi or Ethernet)
Verify the IP address is correct: 192.168.1.1
Clear your browser cache and try again
Disable VPN or proxy if active
Try a different browser (Chrome, Firefox, Edge)

Default Password Not Working?

The password may have been changed by previous owner
Perform a factory reset (hold reset button 10-30 seconds)
Try common variations: admin, Admin, PASSWORD
Check the label on the router for custom credentials
Contact ISP if router is provided by them

How to Factory Reset ZTE ZXHN H108N

Locate the recessed RESET button (usually on back/bottom)
Power on the router and wait until fully booted
Use a paperclip to press and hold RESET for 10-30 seconds
LED lights will blink - keep holding until they restart
Default credentials restored: admin / admin
⚠️ Warning: All settings will be erased (WiFi name, password, etc.)

Security Best Practices for ZTE ZXHN H108N

Protect your network by following these essential security recommendations:

Change Default Password Immediately

CRITICAL

The first thing you should do after logging into your ZTE ZXHN H108N is change the default password. Use a strong password with at least 12 characters, mixing uppercase, lowercase, numbers, and symbols.

Update WiFi Encryption

HIGH

Ensure your WiFi is using WPA3 or at least WPA2 encryption. Avoid WEP and WPA as they are easily cracked. Change the default WiFi name (SSID) to something that doesn't reveal your router model.

Keep Firmware Updated

HIGH

Regularly check for firmware updates for your ZTE ZXHN H108N. Manufacturers release updates to patch security vulnerabilities. Enable automatic updates if available.

Disable Remote Management

MEDIUM

Unless absolutely necessary, disable remote management features. This prevents attackers from accessing your router from the internet.

Enable Firewall

MEDIUM

Make sure the built-in firewall on your ZTE ZXHN H108N is enabled. Consider enabling additional security features like DoS protection and port filtering.

Disable WPS

MEDIUM

WiFi Protected Setup (WPS) has known security vulnerabilities. Disable it unless you absolutely need the convenience.

💡 Pro Tip: Create a guest network for visitors to keep your main network more secure. Most modern routers including ZTE ZXHN H108N support this feature.